You may have encountered a problem with the printer without a fault, but the product is not printed. This article analyzes the cause and proposes a solution.
Reason one: The height setting of the printer is too small. The solution to this problem is to reset the character height to the appropriate size.
Cause 2: The word width or product delay is incorrect. The solution is to re-adjust the word width or product delay.
Cause three: Electric eye failure, solution Check the availability and integrity of the electric eye.
Cause four: The synchronizer mode is set incorrectly. The solution changes the synchronizer control mode.
Cause five: The level of the sensing setting is incorrect. Solution Adjust the sensing level of the electric eye or change the photoelectric level switch of the machine under the guidance of the engineer.
Robot Calibration Solution
Robot Calibration
Automated Precision Inc. , https://www.apiasean.com