Zui recently bought some green potted plants. Returning home from the company after work, listening to the favorite music, watching the lush plants, you can forget the fatigue caused by the work of the day, and quickly let the body and mind calm down. At the beginning of zui, I only raised two or three kinds of plants. The more I bought the more and more zui, the more I couldn’t distinguish them. For my plant idiot, it seems to be the same thing, so I used the stickers to create the label. It is attached to each pot of plants, so it is fully known. Moreover, it is also necessary to do targeted conservation work according to the habits of various plants. The surface of the high-quality labeling machine is protected by a film. Even if it is glued, it will not fade. It is very suitable for the maintenance of gardening pots that are often in contact with water. I believe that with the help of Shanghai Quality Label Company, I will become a horticultural expert after a long time. I used the PT-1010 to make gardening labels, which is very delicate and practical.
Any quality labeling machine must know its usage before use, so that there is no problem. Here are the correct steps for using the labeling machine:
*Step: Install the software and drivers 1. Insert the CD into the CD-ROM drive. If it does not start automatically, open the file on the CD-ROM and double-click "Setup.exe". Installation tips Step by step to install P-touch software.
2. Follow the prompts to select the labeler driver model. When prompted, connect your label printer to the computer using the USB cable and turn on the labeler. Once the labeler is detected, the driver will be installed automatically.
Step 2: Connect to a computer: Connect the label printer to your computer using the interface cable.
Step 3: Install the ribbon 1. Select the available ribbon type according to the model of the brother label machine used. Turn off the power of the labeling machine before installing the ribbon, and ensure that the end of the ribbon passes through the guide groove correctly. If the ribbon is loose, You can use your fingers to rotate the toothed wheel in the direction of the arrow on the ribbon cassette.
2, the installation instructions correctly installed the ribbon, press the label machine power button, press the belt / cut button to remove the ribbon slack phenomenon.
3. The ribbon cassette can only be removed when the roller assembly of the printer is released. If you press the power button on the front of the printer, or if no other operations are performed within 10 minutes of printing the label, it will automatically release.
Food Additives,Crab Chitosan,D-Galactose Powder,Calcium Gluconate
SHAANXI HAIBO BIOTECHNOLOGY CO., LTD , https://www.rozenbio.com