Working principle and use method of high pressure cleaner

The working principle and use method of the high pressure cleaner are provided by Shanghai Bayu technical staff. The details are as follows:

First, the working principle of high pressure cleaner

High pressure water jets are often referred to as high pressure water washers. High pressure water jets are just one of the easiest forms of energy conversion and application. The working principle of the high-pressure cleaner is that the power-driven pump delivers a certain amount of water to the high-pressure pipeline by performing a suction and discharge process on the water, so that it reaches the high-pressure nozzle with a large amount of energy. The diameter of the high pressure nozzle is much smaller than the diameter of the high pressure line. Therefore, when the water flow reaches the high pressure nozzle, it must be accelerated to flow out of the nozzle hole. Only in this way, the water that has accelerated the condensation through the nozzle holes can form a jet. When the jet ejected by the high-pressure cleaner hits the object to be cleaned, it is called a jet operation. When the impact force of the high-pressure water jet is greater than the adhesion of the dirt and the surface of the object, the high-pressure water jet will peel off the dirt and wash away, thereby achieving the purpose of cleaning the object.

Second, the use of high pressure cleaners

1. Connect the three-phase electric switch;

2. When power is on, it is mainly necessary to open the spray gun to avoid the phenomenon of returning water and heat of the machine;

3. When using for the first time, use the oil after 20 hours (the motor oil can be used for motor oil);

4 , after the second time, replace the oil after using 100 hours;

5. When flushing, the pressure will gradually increase, not to be added to the maximum at one time to avoid the machine heating;

6. When using in winter, be careful to apply antifreeze;

7. When adding oil, pay attention to the amount of fuel added, and add it to the cylinder to make the red line slightly higher;

8. When washing, do not point the water gun at people to avoid hurting people;

9. When intermittent flushing, stop the gun for more than 2 minutes to avoid backflow and heat.

10 , when shutting down, pay attention to turn off the power first.

" Working Principles and Usage of Pressure Washers" is provided by Shanghai Bashu. For more information on high pressure cleaners, please visit: