The laboratory oil-free vacuum pump is different from the water circulation pump and the oil rotary plate pump. At present, an information product with advanced structure and many disadvantages of the above two conventional products is improved. At the same time, it is widely used, and it is suitable for products used in the laboratory of university research institutes, pharmaceutical industry enterprises, agriculture and forestry environmental supervision and other units.
The traditional water circulation pump needs to be connected to the water source, which limits the water pump to be used only near the water tank. At the same time, the water in the water tank may be sucked back; the oil pump needs to add the pump oil, the pump oil also has the possibility of sucking back, and the pump oil needs to be frequent. Replacement, and the oil pump will produce certain oil mist pollution when working. All in all, both products require the assistance of other media to work properly. And whether it is the oil that is volatilized in the air or the waste water that is discharged, it will have an impact on the environment.
Compared with the above two traditional products, the new laboratory oil-free vacuum pump is characterized by complete dry operation, no need to connect water source or add pump oil, only need to plug in the power supply to work normally, and there is no pollution annoyance. The main advantages of this mode of operation are:
1. Can be used anywhere, without restrictions. If you use it for out-of-town use, the pump and pump will obviously be limited. The R300-DC oil-free portable vacuum pump can be connected directly to the mobile power supply, so it is not subject to site restrictions.
2. It is not necessary to replace the pump oil to avoid the troubles of future maintenance. For example, when using an oil pump with a rotary evaporator or a vacuum distillation unit, corrosive gases can contaminate the pump oil and damage internal components. The use of CH411 corrosion-resistant diaphragm pump, because there is no need to change the pump, the internal contact parts of the machine are made of PTFE PTFE material, which has strong chemical corrosion resistance, so the use of no pump oil is troublesome and the life is longer. .
3. It will not cause oil mist pollution and can be used in rooms with high requirements such as clean rooms. For example, the BV300E, BV240, and BV235 oil-free waste vacuum suction devices can be used in the cell room of a biological laboratory. Water sources are not available in the cell room, and any oil mist pollution is prohibited, so oil-free products are the most suitable choice.
For more information about the laboratory oil-free vacuum pump instructions and selection, please call us.
A Foot Spa Machine with heat is a device used to provide a relaxing and therapeutic foot massage. It usually has a basin filled with warm water and has various massage settings such as vibration, bubbles, and rollers. The heat function helps soothe tired and aching feet, while the massage setting provides a deep-tissue massage that helps improve circulation, reduce tension, and relieve pain. Some foot spas also come with removable attachments, such as pumice stones and brushes, for extra exfoliation and cleansing. Overall, a foot spa machine with heat is a great tool for anyone looking to pamper their feet and promote overall relaxation and wellness.
Foot Spa Machine With Heat,Bubble Foot Bath Massager,Foot Massage Machine,Pedicure Foot Spa Machine
Huaian Mimir Electric Appliance Co., LTD , https://www.mimirfootspa.com