Steam mixing sandwich pot nine major considerations
According to the information provided by digital technicians and after-sales maintenance personnel, Yachen Machinery is summarized as follows for the reference of food processing users. I hope to help you!
Steam mixing sandwich pot Note:
1. When the steam is heated, the high pressure of the jacket Zui shall not exceed 0.6MPa .
2. When entering the steam, slowly open the inlet valve and adjust to the required working pressure. The bottom of the pot is equipped with a trap and a drain valve. When entering the steam, first open the drain valve until the small amount of steam overflows. , operated by a trap.
3. For safety valves, users can adjust according to the pressure of their own steam. The recommended safety valve type for this equipment is A28H-16C , the specification is DN15 , the setting pressure range is 0.6~0.8MPa , and the setting pressure is 0.63MPa .
4. During the use process, always pay attention to the change of steam pressure and adjust the inlet valve in time.
5. When the jacket is steamed, the temperature of the outer surface of the equipment is high. The user should formulate operating procedures to prevent the operator from being burnt.
6. After stopping the steam inlet, the bottom drain valve should be opened to remove the condensed water.
7. Before dumping the material, remove the stirring shaft, then open the pot fixing device latch, shake the hand wheel to dump the material, pour the material, shake the hand wheel to restore the original position of the pot body, insert the pot body fixing device latch, and reload The upper shaft is agitated and should be installed in place to open the motor.
8. The direction of rotation of the motor should be the same as the direction indicated by the arrow to prevent the stirring shaft from falling off.
9. Before the official production, Zui poured a little edible oil into the pot and tried to check the operation.
We are the one of three leading factory in China, specialized in manufacturing laser distance module since 2004. Bilateral laser distance measurer is one of mutifunctional laser distance device. JRT multifunctional laser measuring device functions include area,distance,length,volume,continuous measurement,addition and subtraction, measuring unit: ft/m/inch. More functions can be customerized. And the laser measuring meter have distance 30/40/60/80/100/150m for chosing. This bilateral degin is our 40m middle laser distance transducer 703A laser measuring meter.
OEM service:
* usb chargable
* voice
* IP54 rating
* Colorful case
Laser Range Finder Measurer,80M Laser Distance Meter,Distance Meter 80M,Laser Distance Meters
Chengdu JRT Meter Technology Co., Ltd , http://www.rangingsensor.com