First, the use of fixed work tools Note: 1, before use to be familiar with the machine structure, performance,? To check whether the rotating parts are flexible, lubrication is good, the power machine and water pump mutual position is correct, the bolts are fastened, Whether the bearings and transmission parts are loose, whether the belt tension is suitable, and the wire connection is reliable, so as not to start or generate sparks and cause fire. 2. When working, the staff is not allowed to leave the post. 3, the transmission part to add a protective cover. To prevent sleeves, trousers, hair, etc. from being caught in the rotating part. 4. After the diesel engine is started, it is necessary to hold the crank handle so as to prevent the handle from being injured by the rotation of the diesel engine. 5. Keep the diesel oil safe and use it safely to prevent fire. Second, the safe operation of the pump: 1, before starting to check whether the bearing is loose, the centrifugal pump should be filled with water before starting. 2. When the water pump rotates, it is not allowed to hang the belt, fill the oil, clean and troubleshoot. 3. Do not start the two pumps at the same time. 4. The axial flow pump must not close the gate valve and block the opening during operation. Third, the safe operation of the thresher: 1, before starting to check the drive, the swing part is flexible, the components are connected firmly, with the gap is normal, the safety device is complete. Lubricate the lubrication area. If you use a motor, you must also check whether the wiring is reliable and whether the circuit insulation is good. 2. After start-up, the machine is allowed to feed the crop evenly and continuously after it reaches normal operation. Rolling must not be over-speed and no bale can be fed. 3. Feeders should be ideologically focused and wear tights. Women must wear work caps or wrap them in towels. 4. When feeding, pay attention to whether the grain has stones, boring tools, tool screws and other hard objects to avoid damage to the machine and cause personal injury accidents. 5. When the machine is rotating, do not hang the belt, oil, clean up and troubleshooting. Fourth, rice mill safety operations: 1, before use to check the installation of roller and rice knife is correct,? Check whether the quality of the rice sieve attached requirements, the installation is reliable. 2. After starting, when the standby machine reaches normal operation, it is allowed to feed grain evenly and continuously. 3. When operating, pay attention to the speed and sound of the power machine and the rice mill, and the temperature of the bearing. The following problems should be found: Turn off the engine and shut down the machine. 1 motor smoke or diesel engine black smoke, 2 blocked, 3 bearings overheated, more than 60 degrees 4, feed, pay attention to whether the grain of stone, trowel, tool screws and other hard objects, so as not to damage the machine and cause personal accidents. 5, adjust the rice knife to be slow, in order to prevent rice knife and roller collision and damage the parts. 6. When the machine is rotating, do not hang the belt, oil, clean up and troubleshooting. 5. Safe operation of the crusher: 1. After the starter, when the standby machine reaches normal operation, it is allowed to feed the crop evenly and continuously. 2, pay attention to the motor, threshing machine speed, sound and bearing temperature. 3. When feeding, the operator should stand on the side of the feeding port. The clothing sleeves should be fastened and masks and work caps should be worn. 4. When feeding, pay attention to whether the grain has stones, trowels, tool screws and other hard objects, so as not to damage the machine and cause personal accidents. 5, the machine is not allowed to turn the belt, oil, cleaning and troubleshooting. 6, found that the following issues should be shut down the engine, stop processing, 1 motor smoke, 2 plugging, 3 crushing quality is not good, 4 bearings overheated, more than 60 degrees. Six, the safe operation of the mill: 1, the processing of materials must be screened and water selection, to prevent damage to the grinding plate. 2. After starting, when the standby machine reaches normal operation, it is allowed to feed grain evenly and continuously. 3, slowly open the gate pull by hand, can not be fully open, so as to avoid material blocking the channel. 4, the operator's clothing sleeves should be tight, wear masks and work caps. 5, the processing of food should first follow the principle of coarse and fine grinding gradually adjust the grinding gap, and repeatedly processed 2-3 times into a fine powder. 6, when processing wheat, the first open 1/3 gate pull, the second full open. 7. At the end of the work, the brake shall be closed, and then the adjusting screw shall be returned. The standby machine may stop for a period of time. Seventh, the safe operation of the ginning machine: 1, The work place should be cleaned around to prevent foreign matter from mixing into the machine. 2, seed cotton, linter, lint and cottonseed should be stored separately. 3. The processed seed cotton should be clean, the water content should not exceed 10%, and large impurities such as cotton shells, fruit branches, petioles, etc. should be picked by hand. It is forbidden to mix iron wire, sawdust, and stones into the cotton. 4. After starting, when the standby machine reaches normal operation, it is allowed to feed the seed cotton uniformly and continuously. 5. The clothing sleeves of operators should be fastened when feeding, and wear masks and work caps. 6. Every shift should be cleaned at least two or three times to avoid clogging. 7. When checking seed cotton, do not put your hand into the middle box to avoid injury. 8. When cleaning the lint, do not touch the brush roller to avoid accidents. 9, before stopping work, should first stop the feed of seed cotton, and continue to run for 1 minutes and then stop.
Pain Relief Patch(Pain Areas)
Pain Relief Patch
[Name] Medical Cold Patch
[Package Dimension] 6cm×8cm 4pieces/box
The pain relief patch is composed of three layers, namely, backing lining, middle gel and protective film. It is free from pharmacological, immunological or metabolic ingredients.
[Scope of Application]
For cold physiotherapy, closed soft tissue only.
[Indications]
The patches give fast acting pain relief for strains, sprains, cramp, bruises, swollen areas or joint stiffness.
[How To Use a Patch]
Please follow the Schematic Diagram. One piece, one time.
The curing effect of each piece can last for 6-8 hours.
[Attention]
Do not apply the patch on the problematic skin, such as wounds, eczema, dermatitis,or in the eyes. People allergic to herbs and the pregnant are advised not to use the medication. If swelling or irritation occurs, please stop using and if any of these effects persist or worsen.notify your doctor or pharmacist promptly. Children using the patch must be supervised by adults.
[Storage Conditions]
Store below 30c in a dry place away from heat and direct sunlight.
Pain Relief Patch(Pain Areas),Shouler Pain Relief Patch,Joints Pain Relief Patch, Muscle Pain Relief Patch
Shandong XiJieYiTong International Trade Co.,Ltd. , https://www.sdxjmedical.com