The crusher is a widely used processing machine in agricultural production. However, some farmers do not strictly follow the procedures in use, ignoring maintenance, not only induced mechanical failure, but also greatly reduce the efficiency of smashing processing. Therefore, when using a crusher, maintenance must not be neglected. 1, promptly check and clean up. After the end of each day's work, the machine should be cleaned in a timely manner to check for looseness of the screws in each part and wear of the contused parts such as the claws and the sieve. 2, add grease. The most common is to install a cap oil cup on the bearing. Under normal circumstances, as long as the oil cup lid rotation 1/4 every two hours, the cup of grease can be pressed into the bearing. In the case of closed bearings, grease can be filled once every 300 hours. After long-term use, if the grease deteriorates, the bearings should be cleaned and replaced with new grease. When the machine is working, the temperature rise of the bearing must not exceed 40°C. If the bearing temperature continues to increase under normal working conditions, the cause should be found out and troubleshooting should be managed. 3. Carefully clean the raw materials to be crushed, and it is forbidden to mix copper, iron, lead and other metal parts and larger stones into the crushing room. 4, do not arbitrarily increase the speed of the grinder. Generally allowed to differ from the rated speed by 8%-10%. When the crusher and the larger power machine work together, it should pay attention to control the flow and make the flow even, not negligence. 5. After the machine is started, do not open or inspect any part inside the machine. Various tools must not be randomly placed on the machine. When the abnormal sound is heard, it should be stopped immediately and the standby can be overhauled after stopping.
Nutrient supplements
What is Nutrient supplements?
Nutritional supplements are preparations used to supplement nutrients that may be lacking in the body's daily diet. These formulations may be single or a combination of multiple nutrients, including but not limited to the following ingredients:
- Protein (e.g. protein powder)
- Fish oil (contains omega-3 fatty acids such as DHA)
- Various vitamins (such as vitamin A, B vitamins, vitamin C, vitamin D, vitamin E, etc.)
- Minerals (e.g. calcium, iron, zinc, selenium, etc.)
- Dietary fiber
- Other specific nutrients, such as Amino Acids, enzymes, probiotics, plant extracts, etc
The purpose of nutritional supplements is to meet the nutritional deficiencies that individuals may have due to special needs, dietary habits, digestive and absorption problems, health conditions (such as disease, pregnancy, aging, etc.) or other reasons. They are usually available in the form of tablets, capsules, oral liquids, powders, etc.
When choosing a nutritional supplement, one should consider an individual's physical condition, diet, and possible side effects. Although nutritional supplements can provide additional nutrients, it does not mean that they are a substitute for a balanced diet. The best strategy is usually to get most of your nutrients through a varied diet and use nutritional supplements when necessary under the guidance of a medical or professional. In addition, excessive consumption of certain nutritional supplements may also pose health risks, so it is recommended to consult a professional before use.
Nutrient Supplements,nutrient supplements benefits,nutrient supplements for the aged,nutraceuticals ingredients,Nutrient supplements manufacturer
Xi'an Day Natural Inc. , https://www.dayextract.com