All stainless steel ultra-clean table filter inspection and stainless steel ultra-clean workbench use and maintenance :
All stainless steel clean bench details:
All stainless steel ultra-clean workbench use and maintenance 1. According to the actual use, the primary filter is removed and cleaned regularly, and the cleaning cycle is generally 3~6 months. (If it is not washed for a long time, the dust will affect the insufficient air intake and reduce the cleaning effect).
2. When the ideal cross-section wind speed cannot be achieved after normal replacement or cleaning of the primary air filter, the working voltage of the fan (rotation knob) should be adjusted to achieve the desired uniform wind speed (the fan is used when the new workbench starts). The working voltage can be adjusted to 80V~90V).
3, generally after 18 months of use, when the fan operating voltage is adjusted to the high point of Zui, still can not reach the ideal wind speed, it means that the high efficiency air filter is too dusty (the filter hole on the filter material has been basically blocked, to Timely update), the general efficient air filter has a service life of 18 months.
4. When replacing the high-efficiency air filter, pay attention to the correct size of the model (original manufacturer configuration), press the arrow wind direction device, and pay attention to the perimeter seal of the filter, no leakage occurs.
order process:
1: Is the all-stainless steel clean bench all 100?
Yes, all stainless steel ultra-clean workbench standards are produced according to the US Federal Standard 209E cleanliness. All samples should be tested before leaving the factory. The standard is based on 0.5 micron dust particle size, and the filtration efficiency is 99.995%. The table can achieve a dust particle size of 0.3 micron cleanliness;
2, all stainless steel ultra-clean workbench, there are several specifications and models? How to choose?
The all-stainless steel ultra-clean workbench has the horizontal and vertical points. It is divided into single and double in the operation of the number. In the operation mode, the vertical can be divided into single-sided single-sided operation, single-sided double-sided Operation, double-sided operation, double-sided operation; this should be selected according to specific requirements.
3: Is the all-stainless steel super-clean workbench good or horizontal?
The horizontal and vertical use effects are the same, and all are up to the US federal standard 209E standard 100-level purification. In practical applications, general hospitals, biological research and pharmaceutical industries will choose vertical, because vertical is the downward supply, horizontal It is in the direction of the person, and some irritating and toxic gases can cause physical harm to the person if they are directly blown into the person. In this case, the vertical selection is generally better; and food testing, edible fungi, seeds It is better to cultivate the general selection level;
4. What is the principle of the ultra-clean workbench ?
The working principle is as follows: the air is sucked into the pre-filter by the fan, passes through the medium-efficiency filter, and then enters the high-efficiency filter by the static pressure box, and the filtered air is sent out in a state of vertical or horizontal airflow, so that the operation area reaches 100 levels. Cleanliness ensures the environmental cleanliness of production.
5. How long should the fan be turned on before working, should the UV lamp be turned on synchronously?
Before the general work, it is necessary to turn on the fan 15 minutes to 20 minutes in advance to clean the clean area and turn on the ultraviolet germicidal lamp for sterilization. The ultraviolet disinfection is because the wavelength is short, the frequency is high, and the photon energy is high for anti-virus disinfection; Remember, when working, please do not turn on the ultraviolet germicidal lamp, otherwise it will burn the eyes and skin of the staff;
Ultra-clean workbench for applications: electronics, medicine, food laboratories, microbiology laboratories.
Shanghai Sujing Industrial Co., Ltd.
　　
If you have any needs, you can always pass with me, thank you very much for your support to Sujing, look forward to working with you.
　　
have a pleasant workday!
　　
Thankyou&Bestregard!
　　
SUJING—JINGHUA
Food additives refer to chemically synthesized or natural substances added to food in order to improve the quality, color, aroma and taste of food, as well as for the needs of antiseptic and processing technology. Due to the rapid development of the food industry, food additives have become an important part of the modern food industry, and have become an important driving force for technological progress and technological innovation in the food industry. In the use of food additives, in addition to ensuring that they play their due functions and roles, the most important thing is to ensure the safety and hygiene of food.
Our company provides chemical food additives, natural food additives, etc.
Food Additives,Beverage Additives,Malic Acid Powder,Natural Food Additives
XI AN RHINE BIOLOGICAL TECHNOLOGY CO.,LTD , https://www.rhinebioteches.com